Norme ISO 14541
Obturation : clapet
Accrochage : à visser
Matériel : acier Zn-Fe (Cr III)
Taraudages : BSP / NPT / SAE / METRIQUE
Joint standard : NBR (en option : FKM, EPDM,...)
T°C service : -25°C / +100°C
Pression de service : 300-450 bar
Connexion sous pression : OUI
| DN / BG / ISO | T - F | Filetage à visser | E (mm) | HEX à visser (mm) | L2 - L3 (mm) | CH2 - CH3 (mm) | REF MALE | REF FEMELLE |
|---|---|---|---|---|---|---|---|---|
| DN13 - BG3 - ISO 12.5 | 08L - M14x1.5 | M36x2 | 42.0 | 36 | 64.0 - 61.5 | 30 | CMVT08L | CFVT08L |
| DN13 - BG3 - ISO 12.5 | 10L - M16x1.5 | M36x2 | 42.0 | 36 | 65.0 - 62.5 | 30 | CMVT10L | CFVT10L |
| DN13 - BG3 - ISO 12.5 | 12L - M18x1.5 | M36x2 | 42.0 | 36 | 65.0 - 62.5 | 30 | CMVT12L | CFVT12L |
| DN13 - BG3 - ISO 12.5 | 15L - M22x1.5 | M36x2 | 42.0 | 36 | 66.0 - 63.5 | 30 | CMVT15L | CFVT15L |
| DN13 - BG3 - ISO 12.5 | 18L - M26x1.5 | M36x2 | 42.0 | 36 | 66.0 - 63.5 | 30 | CMVT18L | CFVT18L |
| DN13 - BG3 - ISO 12.5 | 10S - M18x1.5 | M36x2 | 42.0 | 36 | 66.0 - 63.5 | 30 | CMVT10S | CFVT10S |
| DN13 - BG3 - ISO 12.5 | 12S - M20x1.5 | M36x2 | 42.0 | 36 | 66.0 - 63.5 | 30 | CMVT12S | CFVT12S |
| DN13 - BG3 - ISO 12.5 | 14S - M22x1.5 | M36x2 | 42.0 | 36 | 68.0 - 65.5 | 30 | CMVT14S | CFVT14S |
| DN13 - BG3 - ISO 12.5 | 16S - M24x1.5 | M36x2 | 42.0 | 36 | 68.0 - 65.5 | 30 | CMVT16S | CFVT16S |
| DN25 - BG5 - ISO 25 | 20S - M20x1.5 | M48x3 | 55.0 | 50 | 97.0 - 84.5 | 41 | CMVT20S | CFVT20S |
| DN25 - BG5 - ISO 25 | 25S - M36x2.0 | M48x3 | 55.0 | 50 | 99.0 - 86.5 | 41 | CMVT25S | CFVT25S |
| DN25 - BG5 - ISO 25 | 30S - M42x2.0 | M48x3 | 55.0 | 50 | 101.0 - 88.5 | 41 | CMVT30S | CFVT30S |
